HOMCOM 824-018 Mode D'emploi page 5

ASSEMBLING THE STAND
1. Take all the appliance parts out of the packaging and remove all packaging
materials and inserts.
2. Turn the fan upside down so that you can look at the holder. (Fig.1).
3. Take the power cord to cross the stand (4), see the methods by (Fig.2).
4. Fasten the stand (4), and press it into the outlet hole. (Fig.3)
5. Use 4 pieces of screw to tight up, see the methods by (Fig.4).
Fig.2
Fig.1
Fig.3 Fig.4
HANDLING THE APPLIANCE