Esoteric AB-T1SP1 Mode D'emploi page 5

3
Install the arm base.
Align a positioning indentation on the
underside of the arm base with the pin
on the arm base post when installing it.
When placed correctly, the tops of the
arm base and the arm base post should
be almost the same height.
If there is a large height difference
between the arm base and the arm
base post, the positioning indentation
and the pin might not be aligned. Try
installing the arm base again.
4
Fix the arm base in place.
Tighten the arm base attachment
thumbscrew to fix it in place.
o After fixing it in place, confirm that
there is no looseness in the arm
base.
5
Attach the tonearm to the arm base.
Refer to the tonearm owner's manual
for installation procedures.
6
Install the motor unit.
Following the instructions starting
with procedure 10 on page 16 of the
Grandioso T1 Owner's Manual, install
the motor unit.
5