Esoteric AB-T1SP1 Mode D'emploi page 4

Before use
This product is an arm base kit for mounting
a tonearm on a Grandioso T1.
Supported tonearm
Supreme Analog Tangenta
Package contents
Arm base post × 1
Arm base × 1
(Hole shapes differ depending on the model.)
Arm base attachment thumbscrew × 1
Arm base post attachment screws × 3
Included accessories
Hex wrench × 1
Owner's manual (this document) × 1
Check to be sure the box includes all the
package contents and accessories shown
above. Please contact the store where you
purchased this product if any of them are
missing or have been damaged during
transportation.
4
Installation procedures
If the motor unit has been installed, follow
the procedures beginning on page 19 of the
Grandioso T1 Owner's Manual to remove it
before installing the arm base kit.
1
Remove the top of the leg from the
base unit.
Top of the leg
At the location where you want to
install the tonearm, turn the top of the
leg counterclockwise and remove it.
o Tonearms can be installed in three
locations: the back right, the back
left and the front left.
2
Install the arm base post on the
base unit.
Referring to "Arm base post installation
diagram" on page 6, attach the arm
base post with the attachment screws.