Publicité
Les langues disponibles
Les langues disponibles
English
1. Mute Button
2. Power Button
3. Volume Up Button
4. Stop Button
5. Play/Pause Button
6. Backward Skip Button
7. Volume Down Button
8. Number Button
9. Mode Button
10. Repeat Button
11. Forward Skip Button
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect AC adaptor to the Power Jack of the unit. The red Standby Light will
appear indicating unit has power.
3. Untie the FM Antenna and allow it to hang in a straight line.
4. Press the Power Button to turn on the unit.
Note:
• Do not plug the AC power adaptor to power outlet before all the assembly is completed.
Before turning the power on, make sure again all the connection settings are correct.
Always turn off the power when connecting or disconnecting.
Line Input Connection
You can connect an audio device to this unit and play your music through its
speakers. To do this, connect the 3.5mm auxiliary cable (not included) between
your audio device, and the Line In Jack of this unit, press the Mode Button until
Line In Mode is selected and start playing the music.
5
Publicité
