Before You Begin
This Quick Installation Guide gives you step-
by-step instructions for setting up your
DNR-4020-16P JustConnect 16-Channel H.265
PoE Network Video Recorder. The model you
have purchased may appear slightly different
from the one shown in the illustrations. For more
detailed information about the NVR, please refer
to the User Manual.
Package Contents
This DNR-4020-16P package should include the
following items:
•
DNR-4020-16P JustConnect 16-Channel
H.265 PoE Network Video Recorder
•
Power cord
•
8 x hard disk screw
•
2 x rack mount bracket
•
6 x rack mount bracket screw
•
2 x terminal block
•
Documentation
If any of the above items are damaged or
missing, please contact your local D-Link reseller.
System Requirements
•
Microsoft Windows®
•
Microsoft Edge, Internet Explorer, Firefox,
Chrome, or Safari
Quick Installation Guide
Hardware Overview
Front Panel LED Indicators
1
2
Figure 1: Front Panel LED Indicators
#
LED
Lights up when the device
Power
1
is receiving power and the
Indicator
power switch is turned on.
Hard disk status indicator.
HDD
2
This indicator flashes when
Indicator
data is being transmitted.
Table 1: Front Panel LED Indicator Descriptions
Front Panel Interface Connectors
Figure 2 Front Panel Interface Connectors
#
Interface
KB/Mouse
USB port for a keyboard or mouse.
1
Port
Backup
USB port for a flash drive.
2
Port
Table 2: Front Panel Interface
Connector Descriptions
Description
1
2
Description
1