Publicité
Les langues disponibles
Les langues disponibles
Gasket
1. Spout Installation
NOTE: For installation of a non-swiveling spout to a thin-walled
lavatory such as stainless steel, remove the nut from the top of the
spout shank.
For all installations, slide the gasket onto the spout shank.
Locate the center hole and insert the spout.
Slide the metal washer and nut onto the spout shank.
Position the metal washer so the second hole lines up with the
drain lift rod hole on the back of the spout.
Securely tighten the nut with a wrench. Do not overtighten.
Kohler Co.
Spout Shank
Washer
Nut
3
1011135-2-B
Publicité
