Publicité
Les langues disponibles
Les langues disponibles
!
DO NOT allow the child to slouch,
slide down in the seat, or create slack
in the belt system ❺. If child will not
keep vehicle belt properly positioned,
DO NOT use this booster seat.
!
NEVER position vehicle belt over top
of the armrests ❻.
!
The vehicle seat headrest should not
create a gap between vehicle seat and booster seat
❼. If so, remove the vehicle headrest.
!
DO NOT use any load bearing contact points other
than those described in the instructions and marked in
the child restraint.
IF IN DOUBT ABOUT THESE POINTS OR ANY
QUESTIONS RELATED TO INSTALLATION, PLEASE
CONTACT HARMONY JUVENILE PRODUCTS.
INSTALLATION (WITH BACKREST)
DUE TO VARYING ANGLES OF VEHICLE SEAT BELT
RETRACTORS, EXCESS SLACK IN THE VEHICLE BELT
SYSTEM MIGHT NOT BE REMOVED AUTOMATICALLY.
Once the lap and shoulder portions of the seat belt
are properly positioned and the buckle is attached,
FEED ANY REMAINING SLACK OF THE SEAT BELT
MANUALLY BACK INTO THE RETRACTOR TO TIGHTEN
THE WHOLE SYSTEM.
19
❺
WARNING!
!
❻
❹
❼
Publicité
