Mitsubishi Electric TRANE TPKA0A.1KA70 Serie Manuel D'utilisation page 3

2. Parts Names
 Remote controller (Optional parts)
Wired remote controller
RETURN SELECT
MENU
HOLD
■
Wired Remote Controller
Controller interface
RETURN SELECT
MENU
4 3
Function buttons
7 8
▌1 [ON/OFF] button
Press to turn ON/OFF the indoor unit.
▌2 [SELECT/HOLD] button
Press to save the setting.
When the Main menu is displayed, pressing this button will enable/
disable the HOLD function.
▌3 [RETURN] button
Press to return to the previous screen.
▌4 [MENU] button
Press to bring up the Main menu.
▌5 Backlit LCD
Operation settings will appear.
When the backlight is off, pressing any button turns the backlight on
and it will stay lit for a certain period of time depending on the screen.
When the backlight is off, pressing any button turns the backlight on
and does not perform its function. (except for the [ON/OFF] button)
IR wireless remote controller
TEMP.
ON/OFF
ON
OFF
5
6
ON
HOLD OFF
2 1
9 0
COOL
F
DRY
AUTO
FAN
HEAT
The functions of the function buttons change depending on the
screen.
Refer to the button function guide that appears at the bottom of the
LCD for the functions they serve on a given screen.
When the system is centrally controlled, the button function guide
that corresponds to the locked button will not appear.
Main display
83
Room
Cool Set temp.
83
Mode Temp.
7 8 9 0
Menu screen
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
Main display: RETURN
Cursor
7 8 9 0
▌6 ON/OFF lamp
This lamp lights up in green while the unit is in operation. It blinks while
the remote controller is starting up or when there is an error.
▌7 Function button [F1]
Main display: Press to change the operation mode.
Menu screen: The button function varies with the screen.
▌8 Function button [F2]
Main display: Press to decrease temperature.
Main menu: Press to move the cursor left.
Menu screen: The button function varies with the screen.
▌9 Function button [F3]
Main display: Press to increase temperature.
Main menu: Press to move the cursor right.
Menu screen: The button function varies with the screen.
▌0 Function button [F4]
Main display: Press to change the fan speed.
Menu screen: The button function varies with the screen.
Main menu
Fri Main Main menu
Auto Energy saving
Fan
7 8 9 0
Function guide
en
2