Publicité
Les langues disponibles
Les langues disponibles
CAUTION:
sensor controls must be facing the ground when installation is complete.
CAUTION: Ensure fixture is mounted on wall as indicated by icon in lamp base.
Do not mount UPSIDE DOWN to avoid water damage!
Installation is now complete. Turn on power at circuit breaker and flip wall switch to ON position.
Wall switch must remain in the ON position for the motion detector to work properly.
OPERATING INSTRUCTIONS
SENSOR SETTING
Mode
TEST
SECURITY
(DISTANCE)
To avoid water damage and the risk of electrical shock, the motion
TIME
DISTANCE Setting
Setting
TEST
Any setting.
1
Adjust the
"DISTANCE" to the L,
M, H. In default H
Description
The sensor will detect movement and
the light will activate regardless of time
of day. After movement has stopped or
left the coverage area, the light will
remain on for about 5 seconds, then
turn off.
At dusk, the motion sensor becomes
active. Any movement within the
coverage area will cause the light to
8
Publicité
