Publicité
Les langues disponibles
Les langues disponibles
Wall Mount
Eave Mount
Note: Light fixture and sensor should be mounted as shown above when installed, depending on
type of installation.
PREPARATION
Before beginning to assemble or install lighting fixture, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is missing or damaged, do
not attempt to assemble
the product.
●Estimated Assembly Time: 20 - 40 minutes (Installation time will vary depending on skill level
and existing wiring conditions. Estimated installation time assumes standard wall junction box and
supply wiring are already installed).
●Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, silicone
caulking adhesive.
●Helpful Items (not included): step ladder.
●NOTE: This fixture can only be installed on a wall or ceiling.
●It is recommended to install this fixture at a height of 8 - 10 ft.
ASSEMBLY INSTRUCTIONS
1. Turn OFF power to work area at main circuit breaker or fuse box.
CAUTION: Do not rely on wall switch alone to turn off power.
1
4
Publicité
