camry Premium CR 2169 Mode D'emploi page 3

ENGLISH
SAFETY CONDITIONS. IMPORTANT INSTRUCTIONS ON SAFETY OF USE
PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
1. Read the instruction manual before using the device and follow the instructions
contained in it. The manufacturer is not liable for damage caused by using the device
against its intended use or improper handling.
2.The device is intended for home use only. Do not use for other purposes that are not in
accordance with its intended use.
3. Take special attention when using the device when children are nearby. Do not allow
children to play with the device, do not let children or persons not familiar with the device
use it.
4.WARNING: This equipment may be used by children over 8 years of age and persons
who have no experience or knowledge of the equipment if this is done under the
supervision of a person responsible for their safety or have been given instructions on the
safe use of the device and are aware of the danger involved with its use. Children should
not play with the equipment. Cleaning and maintenance of the device should not be
performed by children unless they are over 8 years of age and are supervised.
5. Do not immerse the device in water or any other liquid. Do not expose the device to
atmospheric conditions (rain, sun, etc.).
6. Do not use the device that is damaged in any way or works incorrectly. Do not repair the
device yourself. Please return the defective device to the appropriate service center for
inspection or repair. All repairs may only be carried out by authorized service points.
Incorrectly performed repair can cause serious danger to the user.
7. Do not use the device near flammable materials.
8. Do not handle the device with wet hands.
9. Batteries may leak if they are exhausted or have not been used for a long time. To
protect your device and your health, replace it regularly and avoid skin contact with leaking
batteries.
PRODUCT DESCRIPTION
1. Battery cover 2. Lighting switch 3. Suction cup base 4. Suction cup tab
OPERATION
1. Remove the battery's cover (1) from the back of the unit, insert alkaline batteries properly: 3 pieces AAA in AD2168 or 3 pieces AA in
CR2169.
Ensure the batteries are fitted the right way round observing the + and- signs on the battery and the product.
2. Clean the surface on which the mirror will be installed. The surface should be dust-free and grease-free.
3. Firmly press the suction cup onto the desired position. Suction works on tiles, glass, ceramic, marble and most other flat surfaces.
4. Press the lighting switch (2) to adjust the brightness of the light, the first time press the switch, the light is the brightest, the second
time press the switch, the light become weak, press the switch again, turn off the light.
6. Gently turn the suction cup base (3) clockwise until you hear a clicking sound, the LED mirror is well assembled.
7. Rotate the mirror to your desired angle.
8. In order to disassemble, pull the suction cup tab (4) while supporting the mirror so that it does not fall.
CLEANING AND MAINTENANCE
1.Keep the mirror out of the reach of the small children as far as possible, please take care of children when they use.
3. Keep the item in a cool dry place, do not touch it with wet hands.
3