MESTIC Cooker MKT-200 black Mode D'emploi page 7

Operation of controls
Turn the controls to the marked, recommended position to attain the desired temperature. Use this guide as a reference.
Important: when not in use, always turn the controls to the "OFF" position and disconnect from the power outlet.
1. For simmering of delicate foods, and to thicken the sauces, etc.
2. For simmering large quantities
3. Shallow frying of meat and pan dishes
4. To bring all dishes to rapid heat
5. To bring all dishes to a boil.
Note: the lamp will go off when the hot plate reaches the selected temperature, and will cycle on and off to maintain the
temperature.
For your safety
When using your hot plate, basic safety precautions should always be followed, including the following:
• Never immerse the hot plate in water or any other liquid.
• Oil and fat being heated are not to be left unattended without adult supervision.
• Do not touch the surfaces or the hot plate when in operation, as they get hot.
• The hot plate is designed only for the heating and cooking of food, and must only be used with cooking utensils placed on it.
• The hot plate must be turn to "OFF" setting and be disconnected from the power outlet when not in use.
• Cooking utensils, regardless of their size, should not project beyond the hot plate or intrude into the area within the close
proximity of the controls.
• It is dangerous to operate any electrical product with a damaged cord or plug, or after the product malfunctions or is dropped
or damaged in any manner. Return the complete product to the place of purchase for inspection and repair.
How to take care of your hot plate
• Disconnect the hot plate from the power outlet.
• Do not immerse the hot plate in any liquid.
• Do not allow the cord to touch any hot surfaces of the hot plate.
• Clean the painted surface with a damp soft cloth and mild household cleaning powder.
• Baked on marks on the circular hot plate can be removed with a household cleaning powder. Turn the unit on for a moment to
dry after cleaning.
• Commercially available hot plate cleaners are recommended to preserve the natural finish of the hot plate.
Read and save these instructions carefully.
Recycling
This product bears the selective sorting symbol for waste electrical and electronic equipment This means that
this product must be handled pursuant to European Directive 2021/19/EU in order to be recycled or dismantled to
minimize its impact on the environment. For further information, please contact your local or regional authorities.
Electronic products not included in the selective sorting process are potentially dangerous for the environment and
human heath due to the presence of hazardous substances.
Declaration of conformity
Hereby Gimeg Nederland B.V. declares that the device MKT-200, applies all basic requirements and other relevant regulations listed
in the European directive for electromagnetic compatibility (2014/30/EU) and low voltage directive (2014/35/EU). If you require a full
declaration of conformity, you can contact the adress listed on the backside of this manual
ENGLISH