Télécharger Imprimer la page

TREVIDEA Girmi SL-801-22 Manuel De L'utilisateur page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 34
Svuotare il serbatoio capovolgendo il ferro da stiro e scuotendolo con delicatezza.
Lasciare che la piastra si raffreddi completamente.
Avvolgere il cavo di alimentazione nel fondello posteriore.
Lasciare il prodotto in posizione verticale.
CARATTERISTICHE TECNICHE
Alimentazione: AC 230V~ 50-60 Hz. Potenza: 2200W
Capacità serbatoio: 450 ml
ENGLISH: SAFETY INSTRUCTIONS
The following are important notes on the installation, use
and maintenance; save this instruction manual for future
reference; use the equipment only as specified in this
guide; any other use is considered improper and
dangerous; therefore, the manufacturer cannot be held
responsible in the event of damages caused by improper,
incorrect or unreasonable use.
Before use, ensure the equipment is undamaged; if in
doubt, do not attempt to use it and contact the authorized
service center; do not leave packing materials (i.e. plastic
bags, polystyrene foam, nails, staples, etc.) within the
reach of children as they are potential sources of danger;
always remember that they must be separately collected.
Make sure that the rating information given on the
technical label are compatible with those of the electricity
grid; the installation must be performed according to the
manufacturer's instructions considering the maximum
power of the appliance as shown on the label; an incorrect
installation may cause damage to people, animals or
things, for which the manufacturer cannot be considered
responsible thereof.
If it is necessary to use adapters, multiple sockets or
electrical extensions, use only those that comply with
current safety standards; in any case do not exceed the
power consumption limits indicated on the electrical
adapter and / or extensions, as well as the maximum
9

Publicité

loading

Ce manuel est également adapté pour:

Girmi st60