Publicité
Liens rapides
The Little Giant MD series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersible
use. Volute and magnet housing are glass-filled polypropylene for excellent chemical resistance. Impeller is glass-filled
polypropylene and ceramagnet "A" (barium ferrite). Shaft and thrust washers are titanium for excellent wear and
trouble-free service. Pumping heads are easily rotated, cleaned or serviced with no special tools required. Spindle shaft
is supported at both ends to prevent impeller damage during start-up and stop of pump.
TE-3-MD
Features
n
n
n
n
n
Construction
n
n
n
n
n
n
Thermally protected, totally enclosed,
fan-cooled motor
Ball bearings
Specific gravity to 1.1
Fluid temperature to 150°F
Ambient air temperature to 77°F
NOTE: Consult your local distributor or the
factory for applications with higher ambient
temperatures, specific gravities and viscosities.
Volute — Glass-filled polypropylene
Housing — Glass-filled polypropylene
Impeller — Glass-filled polypropylene and
ceramagnet "A" (barium ferrite)
Shaft — Titanium
Thrust Washers — Titanium
O-Ring — Nitrile
Magnetic Drive
Publicité
Manuels Connexes pour Little Giant TE-3-MD
Sommaire des Matières pour Little Giant TE-3-MD
- Page 1 Magnetic Drive TE-3-MD Features Thermally protected, totally enclosed, fan-cooled motor Ball bearings Specific gravity to 1.1 Fluid temperature to 150°F Ambient air temperature to 77°F NOTE: Consult your local distributor or the factory for applications with higher ambient temperatures, specific gravities and viscosities. Construction Volute — Glass-filled polypropylene Housing — Glass-filled polypropylene Impeller — Glass-filled polypropylene and ceramagnet “A” (barium ferrite) Shaft — Titanium Thrust Washers — Titanium O-Ring — Nitrile The Little Giant MD series features leakproof, seal-less magnetic drives and are designed for in-line, non-submersible use. Volute and magnet housing are glass-filled polypropylene for excellent chemical resistance. Impeller is glass-filled polypropylene and ceramagnet “A” (barium ferrite). Shaft and thrust washers are titanium for excellent wear and trouble-free service. Pumping heads are easily rotated, cleaned or serviced with no special tools required. Spindle shaft...
- Page 2 TE-3-MD NOTE: Designs and dimensions may vary for various reasons (i.e. type of motor). This information should be used as general guide rather than an unqualified guarantee. Specifications are subject to change without prior notice. Specifications Performance (GPM @ Head)
- Page 3 Nota: La configuración del motor puede variar de modelo a modelo. PUMP CONSTRUCTION The patented Little Giant magnetic drive pump design consists of a cylindrical drive magnet attached to the motor shaft, which rotates around a chemical resistant plastic separator housing. Inside this housing is a magnet completely encapsulated in chemical resistant plastic, and fixed to the impeller.
- Page 4 MATERIALES DE LA BOMBA Votre pompe Little Giant vous est livrée complètement préassemblée et prétestée par l’usine. Les pompes de la série MD peuvent Las piezas plásticas están hechas de polipropileno relleno con vidrio. El eje de perno estacionario y las arandelas de empuje fonctionner avec la plupart des liquides légèrement corrosifs, tels les solutions à...