Télécharger Imprimer la page

LG F2T2TYM1S Manuel Du Propriétaire page 12

Publicité

Les langues disponibles

Les langues disponibles

global_main.book.book Page 12 Tuesday, October 11, 2022 10:05 AM
INSTALLATION
12
NOTE
• You can purchase rubber cups (part No.
4620ER4002B) from the LG service centre.
Ventilation
• Make sure that air circulation around the
appliance should not be impeded by carpets,
rugs, etc.
Ambient Temperature
• Do not install the appliance in rooms where
freezing temperatures may occur. Frozen hoses
may burst under pressure. The reliability of the
electronic control unit may be impaired at
temperatures below freezing point.
• If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
Electrical Connection
• Do not use an extension cord or double adapter.
• Always unplug the appliance and turn off the
water supply after use.
• Connect the appliance to an earthed socket in
accordance with current wiring regulations.
• The appliance must be positioned so that the
plug is easily accessible.
• Power outlet must be within 1 meter of either
side of the appliance.
WARNING
• Repairs to the appliance must only be carried out
by qualified personnel. Repairs carried out by
inexperienced persons may cause injury or
serious malfunctioning. Contact your local
authorised LG repairer.
• The power plug must be plugged into an
appropriate outlet socket that is installed and
grounded/earthed in accordance with all local
codes and ordinances.
Levelling the Appliance
Removing the Transit Bolt
Assemblies
CAUTION
• To prevent the appliance from severe vibration
and breakage, remove transit bolts and
retainers.
4
X
1
4
X
3
1
Remove the 4 transit bolts and rubber spacers
from the rear of the appliance.
2
Loosen the transit bolts by turning them
anticlockwise with an appropriate spanner.
3
Remove the transit bolts with a straight pull.
4
Fit the plastic blanking caps supplied in the
accessories bag into the gaps left by the
removal of the transit bolts. The transit bolts
should be stored for future use.
4
X
2
4

Publicité

loading