EAS ELECTRIC EMRH608VRT-N Guide D'utilisation page 23

CHIMNEY ASSEMBLY
The chimney can only be installed with exhausting hood.
Lower Decorative Chimney
 Fix a Chimney fixing bracket 21 onto the Lower Decorative Chimney with
2 screws 12 (4.2 x 9.5) supplied with the hood.
21
2.1
12
 Slightly widen the two sides of the flue and hook them onto the hood body,
making sure that they are well seated.
Upper Decorative Chimney
 Slightly widen the two sides of the upper chimney and hook them between the
wall and the bracket 21 which is fixed on the Lower Decorative Chimney.
 Fix the upper chimney onto the bracket 21 with 2 screws 12 (4.2 x 9.5) supplied
with the hood.
9
V.7