Sony ID Telephone IT-ID80 Mode D'emploi page 13

Notes
• Do not allow more than 20 seconds to elapse between each step of the
procedure.
• When the batteries are expired or removed for more than one minute, the
stored numbers will be erased.
Tip
If you enter a wrong number, press (PGM), then start from the beginning.
To store a number to be dialed via Private Branch Exchange
(PBX)
Before entering a phone number in Step 3 on page 12, do as follows:
1
Enter the outside line access digit (e.g., 9).
2
Press (REDIAL/PAUSE).
To check the stored number
While the phone is not in use, press the desired one-touch dialing
button, or press (SPEED DIAL) and the desired speed dialing number
((0) to (9)).
The stored number appears on the display for 20 seconds.
To change a stored number
Store a new number, as described on the previous page.
Making calls with one-touch dialing
1
Pick up the handset, or press (SPEAKERPHONE).
2
Press one of the one-touch dialing buttons ((A) to (E)).
Making calls with speed dialing
1
Pick up the handset, or press (SPEAKERPHONE).
2
Press (SPEED DIAL).
3
Enter the desired speed dialing number ((0) to (9)).
13
Telephone Features
EN