Indel B SW CUBE 24 V Instructions D'utilisation page 30

SW CUBE 24V
6.2 - SECURING TO SEAT
WARNING: while driving it is necessary to secure "CUBE" in a stable and safe manner in order to avoid
accidental falls and damage to people and things.
If "CUBE" is placed on the passenger's seat there is a method to secure it by using the vehicle's seat belt.
WARNING: if placed on the seat it is necessary to secure "CUBE" in a stable and secure manner even if the
vehicle is idle
If "CUBE" is placed in another location, you can use the supplied sling to secure it in the best possible manner.
Securing by means of the vehicle's seat belt
1 Place "CUBE" on the seat (with the exit nozzles set towards the driver).
Solution 1
Thread the vehicle's seat belt through "CUBE"'s
handle near the seat's backrest: insert it from
2
below, wrap it around the handle and fasten the
buckle.
SW_CUBE_24V_28-02-2019
Solution 2
In case the buckle cannot be threaded through
the handle, employ the following procedure:
fasten the seat belt; now thread the supplied sling
2 (L) through "CUBE"'s handle, through the seat
belt's horizontal and oblique straps and close the
ring with the sling's buckle; tighten as much as
possible in order to have a secure hold.
28