SNOWJOE 24V-X2-SB18-XR Manuel De L'opérateur page 11

Chute Crank Assembly
1. Slide the upper chute crank through the rubber ring
located on the middle frame (Fig. 10).
Fig. 10
Rubber ring
2. Loosen the screw on the lower chute crank by hand
(Fig. 11).
Fig. 11
Crank rod
connector
Lower chute
crank
3. Slide the upper chute crank into the lower chute crank
(Fig. 12).
Fig. 12
Upper chute
crank
Crank rod
connector
Lower chute
crank
Upper chute crank
Thumbscrew
4. Align the screw holes and tighten the screw by hand
(Fig. 13).
Fig. 13
Thumbscrew
Operation
m
WARNING!
Keep the area to be cleared free of stones,
toys or other foreign objects that the rotor blades might pick
up and throw. Such items could be covered by snow and are
easy to overlook, so be sure to conduct a thorough inspection
of the area before beginning work.
Starting + Stopping
1. Open the battery compartment covers and slide each
battery down until it clicks to lock it into position (Fig. 14).
Fig. 14
11
Battery