Télécharger Imprimer la page

camry CR 2020 Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 7
device (RCD) in the power circuit, with residual current rating not more than 30 mA. Contact
professional electrician in this matter.
21. If the device utilises a power adaptor, do not cover it, because this can cause a
dangerous temperature rise and can damage the device. Always connect the power adaptor
cable to the device, and then connect the power adaptor to the power socket.
22. Do not use the Hair dryer in the vicinty of water sources, for example under the showers,
in baths, at the sinks with water.
23. Always unplug hair dryer if You use the aplliance in bathroom. The nieghbourhood of
water is dangerous even if the hair dryer is turned off.
24.
Do not immerse the unit in water. In case of falling down into water unplug immediately.
Do not put hands into water if hair dryer is pluged in. Before next use the appliance should
be checked by qualified electician.
25. Always turn off appliance after using.
26. Do not block air inlet and outlet
27. Do not direct the hot stream to the cord.
28. After use turn off and unplug hair dryer .
29. Do not wrap the cord around the appliance.
30. Hair dryer heat when working. Do not touch hot surface.
31. Never use sharp tool to clean the hair dryer.
32. Be sure that accessories (concentrator, diffusor) are dry, before you attach it to hair
dryer.
33. Never direct hot air toward eyes and other sensitive parts.
PRODUCT DESCRIPTION (pic. 1)
1 - housing
3 - switch On/Off/temperature adjustment
5 - swivel cord
USING THE DEVICE
1. Attach brush (2) - type as required
2. Plug into socket.
3. Turn on hair styler with switch (3). Adjust required air temperature (C - cool shot, 1 - lower temperature and speed, 2 - higher
temperature)
4. Separate streak of hair, brush out, and start to wind from the end on the brush. Wait few seconds till hot air stream consolidate shape of
winded hairs.
5. Unwind hairs.
6. Turn off hair styler and form required hairstyle with brush or comb.
7. Unplug from the socket.
CLEANING AND MAINTENANCE
1. Unplug Hair Styler before start cleanning.
2. Wipe outer housing (1) with damp cloth. Do not use abrasive or sharp materials.
3. Clean brush from hairs after each use.
4. Check if the air inlet cover is not stuck with hairs or other dirt. If necessary clean this out.
5. Do not leave any hairs on the hair styler.
6. Do not wind cord around the appliance.
TECHNICAL DATA
Power: 1000-1200W
Voltage: 230V~50Hz
Max noise level:
L : 72dB
wa
To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding
waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous
components, which may effect the environment. Do not dispose this appliance in the common waste bin.
LESEN SIE AUFMERKSAM WICHTIGE ANWEISUNGEN BEZÜGLICH DER SICHERHEIT
DER BENUTZUNG BEWAHREN SIE DIESE FÜR DIE ZUKUNFT AUF
Bei Verwendung des Gerätes zu gewerblichen Zwecken werden die Garantiebedingungen
DEUTSCH
DEUTSCH
ALLGEMEINE SICHERHEITSVORSCHRIFTEN
2 - removalbe brushes
4 - brush lock button
4

Publicité

loading