KW Hydraulik STANLEY DUBUIS BCP085 Manuel D'utilisation page 10

MAINTENANCE
English
He must be realized once a year if intensive use. Consult us.
CONTROL OF THE HEAD
He must be made in every use of the tool. Verify that there is no crack on the cutting head. If a crack is visible on the cutting
head, do not use the tool. Send the tool to the After-sales service to change the head unit
WARRANTY
The KW Hydraulik GmbH (hereinafter called "KWH"), subject to the exceptions contained below, warrants new tools for a period of one year from
the shipping date from KWH, to be free of defects in material and/or workmanship at the time of delivery. KWH will, at its option, repair or replace
any tool or part of a tool, or new part, which is found defective upon examination by a KWH authorized service outlet or by KWH's factories in
Blois, France or Milwaukie, Oregon USA.
HIGH PRESSURE TOOLS: High pressure tools (branded "KWH") such as cable cutters, crimpers, hydraulic high pressure pumps, have been
designed for NON INTENSIVE use. Warranty is limited to 10.000 cycles on manual tools and 15.000 cycles for energized tools.
FULL PAYMENT: A Guaranty claim doesn't not allow to partly or totally defer the payment of the equipment.
WARRANTY CLAIMS: To benefit from KWH warranty, individual has to inform without any delay KWH about the defects of the equipment in
material and/or workmanship. It is also requested to supply with the warranty claim documentation which proves the sale/purchase of the tool or
the tools' first date of usage and serial number. The term "DOCUMENTATION" as used in this paragraph is defined as a bill of sale, or letter of
intent from the first retail customer.
RESPONSIBILITY: Equipment users must take all necessary security measures.
EXCEPTIONS FROM WARRANTY
FREIGHT COSTS: Freight costs to return parts to KWH, if requested by KWH for the purpose of evaluating a warranty claim for warranty credit,
are covered under this policy if the claimed part or parts are approved for warranty. Freight costs for any part or parts which are not approved for
warranty credit will be the responsibility of the individual.
DIES & CUTTING ACCESSORIES: Dies & cutting accessories such as breaker tool bits, dies, blades ... are warranted to be free of defects in
material and or workmanship at the time of delivery only.
ITEMS PRODUCED BY OTHER MANUFACTURERS: Components which are not manufactured by KWH and are warranted by their respective
manufacturers.
Costs incurred to remove a KWH manufactured component in order to service an item manufactured by other manufacturers.
REPAIRS, ALTERATIONS, MODIFICATIONS: Alterations or modifications to any tool or part. All obligations under this warranty shall be termi-
nated if the new tool or part is altered or modified in any way.
Any failure or performance deficiency attributable to repairs by anyone which in KWH's sole judgment caused or contributed to the failure or
deficiency.
NORMAL WEAR : Any failure or performance deficiency attributable to normal wear and tear such as tool bushings, retaining pins, wear plates,
bumpers, retaining rings and plugs, rubber bushings, recoil springs, seals, guiding rings, ...
INCIDENTAL / CONSEQUENTIAL DAMAGES: To the fullest extent permitted by applicable law, in no event will KWH be liable for any incidental,
consequential or special damages and/or expenses.
FREIGHT DAMAGE : Damage caused by improper storage or freight handling.
LOSS TIME: Loss of operating time to the user while the tool(s) is out of service.
IMPROPER OPERATION: Any failure or performance deficiency attributable to a failure to follow the guidelines and/or procedures as outlined in
the tool's operation and maintenance manual.
MAINTENANCE: Any failure or performance deficiency attributable to not maintaining the tool(s) in good operating condition as outlined in the
Operation and Maintenance Manual.
HYDRAULIC PRESSURE & FLOW, HEAT, TYPE OF FLUID: Any failure or performance deficiency attributable to excess hydraulic pressure,
excess hydraulic back-pressure, excess hydraulic flow, excessive heat, or incorrect hydraulic fluid.
MIS-APPLICATION: Any failure or performance deficiency attributable to mis-application. "Mis-application" is defined as usage of products for
which they were not originally intended or usage of products in such a matter which exposes them to abuse or accident, without first obtaining the
written consent of KWH. PERMISSION TO APPLY ANY PRODUCT FOR WHICH IT WAS NOT ORIGINALLY INTENDED CAN ONLY BE OB-
TAINED FROM KW HYDRAULIK GMBH ENGINEERING.
0512 - BCP055G - 10 -KW Hydraulik GmbH – Köppelsdorfer Str. 132 – D-96515 Sonneberg – www.kw-hydraulik.de