KW Hydraulik STANLEY DUBUIS BCE025G Manuel D'utilisation page 17

CHANGE THE MOVEABLE BLADE
Make sure that the mobile blade is in the retract position before opening the bolt
Slide the battery all the way into the
tool until lock clicks.
Screw
Push on the trigger to move forward
the blade until see the screw
Axis
Remove the axis
0715 - BCE025G - 17 KW Hydraulik GmbH – 96515 Sonneberg – Germany – www.kw-hydraulik.de
Remove the moveable blade PtNb78502 (same than moveable
blade) and replace it by new one
MAKE SURE THAT THE BLADE IS IN THE RIGHT WAY ROUND
To reassemble, put the new blade into the piston, put the
axis in its place and screw the screw.
Open the head
Screw
Unscrew the screw with 2.5mm
hexagonal key
Moveable
blade
English