König Electronic KN-MICW510 Mode D'emploi page 2

Introduction:
VHF operating wireless microphone with 1 channel and quartz locked
signal for optimal reception. Squelch circuit for noise free reception.
Note: it's not possible to use two systems in the same area.
Package contents:
1x Receiver
1x Microphone
1x AC/DC adapter
1x 6,3mm microphone cable
Description receiver:
1. Antenna: Fixed-length antenna. Pull out the antenna for optimal
reception.
2. Power Indicator: The LED lights when the receiver is ready to
operate.
3. AF Indicator: The LED lights to indicate that the audio signal from
the microphone has been received.
4. RF Indicator: This LED lights to indicate that the connection
between the receiver and the microphone is established.
5. AF Output: Unbalanced 6.3mm mono jack audio output for
connecting to amplifi er or mixer.
6. Mic/Line Switch: Select AF output level for Mic (-20dB) or Line
(0dB).
7. SQ: The squelch adjusts the output level to avoid external noise.
Setting the squelch to maximum will reduce the range of the system.
Set the squelch to minimum before turning the receiver on.
8. DC Jack: DC input connector for the supplied AC adapter. Use only
the supplied adapter.
2