Télécharger Imprimer la page

Sinji SIEM-0109 Manuel page 3

Serpillière électrique

Publicité

Les langues disponibles

Les langues disponibles

1.
Important safety instructions
1. Only use the adapter provided with the product for charging. Do not use other adapters.
2. Do not use the product unless the mop is properly installed onto the machine.
3. Keep the machine out of the reach of children and do not allow them to use it as a toy.
4. Do not stand on the product or put your feet on the product while it is in use to avoid damaging it.
5. Do not immerse the product in water.
2. Installation
1. Install the handle and connecting rod. Insert the aluminum tube of the handle into the joint connected with
the aluminum tube, then insert the connecting aluminum tube into the connector, and fi nally confi rm that
the locating pin is put in place
2. Install the mop pads onto the turn plate
3. Operation intructions
3.1Power on / off
Gently press the "Power switch", on the handle of the Electric Mop to turn it on or off.
3.2 Water injection
Above the "Power switch", you can fi nd the "Water spray switch". If you press this, water will come
out from the nozzle.
3.3 Filling the water supply
Remove the silicon cover and fi ll the container with clean water or a diluted cleaning solution.
3.4 Charging
If the electric mop is being charged, a red light will show. After being fully charged, the red indica
tor light turns off.
EN
EN
NL
NL

Publicité

loading

Produits Connexes pour Sinji SIEM-0109