Publicité
Les langues disponibles
Les langues disponibles
You can select from among the following items
and parameters.
Text Size:
Text Type:
Text Edge:
Text Color:
Text Opacity: Auto, Solid, Transparent,
Background
Color:
Background
Opacity:
NOTE:
•
You cannot set both "Text Color" and "Background
Color" as a same color.
•
You cannot set both "Text Opacity" and "Background
Opacity" to "Transparent".
Setting the picture size
You can change to a variety of picture sizes—
Natural, Cinema Wide1, Cinema Wide2, Cinema
Wide3, Full and Native.
Selecting the picture size
1
Select "Picture ⇒ Picture Size", then press ▶ or
ENTER to display "Picture Size" menu.
2
Press ▲ or ▼ or corresponding Number buttons
(0-4) to select the desired picture size, as described
below.
Picture Size
0.Natural
1.Cinema Wide1
2.Cinema Wide2
3.Cinema Wide3
4.Full
NOTE:
•
Selectable picture sizes may vary depending on the
input source or broadcast signal.
•
Picture Size menu also can be displayed by
pressing SCREEN SIZE on the remote control.
Natural
In some cases, this image will display the size of
standard 4:3 with a black side bar.
EN 22
Auto, Small, Standard, Large
Auto, Style1, Style2, Style3, Style4,
Style5, Style6, Style7
Auto, None, Raised, Depressed,
Uniform, Left Shadow, Right
Shadow
Auto, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Translucent, Flashing
Auto, Black, White, Red, Green,
Blue, Yellow, Magenta, Cyan
Auto, Solid, Transparent,
Translucent, Flashing
Cinema Wide1 (for 4:3 format programs)
To fill the screen, the right and left edges are
extended, however; the center of the picture remains
near its former ratio.
The top and bottom edges of the picture may be hidden.
Cinema Wide2 (for letter box programs)
The entire picture is uniformly enlarged—it is
stretched the same amount both wider and taller
(retains its original proportion).
The top and bottom edges of the picture may be hidden.
Cinema Wide3 (for letter box programs with
subtitles)
To fill the width of the screen, it is extended
horizontally. However, it is only slightly extended at the
top and the bottom.
The top and bottom edges of the picture may be hidden.
A B C D E F G - - - - - - - - - - - - - - - -
Full (for 16:9 source programs)
Full will display the picture at the maximum size.
Native (for PC mode only)
Detects the resolution of the signal of the image and it
will be shown on the screen with same amount of pixels.
NOTE:
•
Some High Definition and/or Digital broadcasts may
not allow you to change the picture size.
•
In HDMI or COMPONENT mode with a scanning
rate of 720p, 1080i or 1080p (HDMI only) only the
Cinema Wide2 and Full picture size feature are
available.
•
In PC mode, only the Natural, Full and Native
picture size features are available. In PC mode
(WXGA, WXGA+, FHD), only the Full and Native
picture size features are available.
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
Publicité
