Télécharger Imprimer la page

Tristar MX-4154 Mode D'emploi page 5

Masquer les pouces Voir aussi pour MX-4154:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Before the firSt uSe
• Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
• Before using your appliance for the first time, wipe off all removable
parts with a damp cloth. Never use abrasive products.
• Put the power cable into the socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz)
• Place the device on a flat stable surface and ensure a minimum of
10 cm. free space around the device. This device is not suitable for
installation in a cabinet or for outside use.
• Never use the mixer for longer than 1 minute continuously, after this
allow the mixer to cool down for 5 minutes.
uSe
using the hand mixer
• Turn the engine (No. 1) clockwise to the mixer foot (No. 4)
until it clicks.
• Place the guard (No. 3) in the blender feet (No. 4), it will
snap.To remove the guard from the mixer foot, pull the
guard from the mixer foot.
• Plug in the power and select the speed switch(No. 2) to
the desired speed. If you press one of the switches off the
device directly, by releasing the switch stops the machine
immediately. You can stir minor ingredients such as egg white, cream,
instant desserts and eggs and sugar for cakes.
using the chopper
• Turn the engine (No. 1) clockwise to chopper (No. 5) until
it clicks.
• To unlock the chopper, twist the chopper clockwise loose.
• Plug in the power and select the speed switch (No. 2) to
the desired speed. If you press one of the switches off the
device the device starts directly, by releasing the switch
stops the machine immediately.
• Always use the delivered measuring cup for pureeing and chopping
fruit, vegetables and small pieces of meat.
using the chopper bowl
• Place the blade (No. 8) at the pivot point in the middle of
the bowl (No. 7).
• Attention! The knife is very sharp. Unscrew the lid (No. 6)
clockwise to the bowl. Place the engine (No. 1) on the lid
and turn it clockwise until it clicks.
• Plug in the power and select the speed (No. 2) the
desired speed. If you press one of the switches the
device starts directly, by releasing the switch stops the
machine immediately.
• You can use meat, cheese, vegetables, herbs, bread, cookies and nuts
1
heels. Do not chop any hard foods like coffee beans, ice cubes, spices
4
or chocolate, this may damage the knife. Remove any bones from the
meat and cut food into cubes of 1-2 cm. Place the bowl (No. 7) on a flat,
3
stable surface.
Stick blender
EN
1
5
1
6
8
7
5

Publicité

loading