MAXXTER ACT-IPC-01 Manuel page 7

4. Now press the plus (+) sign in the top right corner of the screen to add a
camera to the app camera list.
5. There are three ways for connecting your camera:
I. Smartlink
II. Add manually.
III. QR code scan (only if QR code is present on your camera)
Easiest is the Smartlink option. To use this, put the phone near the camera.
Listen carefully, the Smartlink option only works when the camera is beeping
every other second. This beeping means the camera can be paired to your
wifi network. If this is not the case, please try to reset the camera with a pin
via the reset button at the bottom of the camera.
The Manual Add option is only suitable to add cameras that are already
connected to wifi. If this is not the case, please use the Smartlink option.
The QR code scanning option is only available when a sticker with QR code
is present on your camera. If there is no sticker, the QR code option is not
available.
Please follow the steps on the next pages to connect the camera to your wifi
network via the Smartlink option.
All brands and logos are registered trademarks of their respective owners
ACT-IPC-01
ROTATING HD WIFI CAMERA
7