Publicité
Les langues disponibles
Les langues disponibles
o
Clean the inside and outside of the refrigerated showcase. Remove and clean off all
water and mould spots;
o
Leave the doors open, so the refrigerated showcase can dry quicker.
Safety instructions for maintenance
o
Check the mains lead from time to time to ensure it isn't damaged in any way. Never use
the device if the lead is damaged. If the lead is damaged it must be replaced by a
qualified electrician.
o
In case of damage or malfunction, please contact your retailer or our customer service
centre.
o
Only a qualified technician and using original spare parts and accessories should carry
out repairs and maintenance of the device. Do not attempt to repair the device yourself.
7. Troubleshooting
Problem
Cooling effect
insufficient.
No cooling effect at
all.
- 23 -
Cause
• Direct sunlight or heat
sources nearby.
• Bad air circulation
around the device.
• Doors are not closed
properly or have been
open for too long.
• Door sealing is
damaged or deformed.
• Interspaces between
the foods are too small
or
too many foods are
stored.
• Air inlet and/or air
outlet blocked.
• The thermostat is set
on FREEZE from a long
time.
• Plug not connected to
socket.
• Defective fuse.
• Power breakdown.
• Remove refrigerated showcase
from the heat source.
• Arrange sufficient space between
walls and other items.
• Properly close the doors. Keep
the door opening periods low.
Contact the retailer.
• Contact retailer
• Arrange sufficient space between
the foods in the refrigerated
showcase and remove
dispensable foods.
• Keep free/ unblock the air
inlet/outlet from (parts of) food
or other material.
• Position the thermostat between
LOW and HIGH and/or contact the
dealer.
• Connect the plug properly.
• Check the power supply.
• Check the power supply.
Solution
Publicité
