Metabo HPT NT 1865DMAS Manuel D'instructions Et De Sécurité page 14

3. Battery Charger
Model
Input power source
Charging time
(At a temperature of 68°F (20°C))
Charging voltage
Charging current
Weight
NOTE The charging time may vary according to temperature and power source voltage.
NAIL SELECTION
● Be sure to use only the genuine metabo HPT
nails for the NT1865DM(S), NT1865DMA(S)
or the NT1850DE(S). The use of any other
nails can result in tool malfunction and/or nail
breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with
this Nailer.
Dimensions of nails
<NT1865DMA(S)>
15 Gauge fi nish nails
(Angle: 34°)
WARNING
UC18YFSL
Single phase: AC 120 V 60 Hz
Approx. 45 min
DC 14.4 – 18 V
DC 3.5 A
1.1 lbs. (0.5 kg)
Min.
.095" (2.4mm)
.072" (1.8mm)
English
Max.
13