Publicité
MAINTENANCE, SERVICING & REPAIR
WARNING: Ensure the unit is disconnected from the mains electricity supply before attempting
maintenance or servicing.
This range of equipment does not require routine servicing. The only maintenance required is to clean
external surfaces with a damp cloth and mild detergent. Spillages or splashes should be cleaned up
straightaway after isolating the unit from the mains electricity supply.
REPAIRS
Any repairs or replacement parts must be undertaken by suitably qualified personnel.
Only spare parts supplied or specified by Antylia Scientific Ltd or its agent should be
used. Fitting of non-approved parts may affect the performance of the safety features
designed into the instrument.
For a comprehensive list of parts required by service engineers conducting internal repairs, or to receive a
service manual, please contact the Service Department of Antylia Scientific Ltd quoting both the
model and serial number.
Antylia Scientific Ltd.
Service Department,
Beacon Road,
Stone,
Staffordshire,
ST15 0SA,
Email: cpservice@antylia.com.
Phone: +44 (0)1785 810475
If you require further technical or application assistance please contact:
Email: cptechsupport@antylia.com
Phone: +44 (0)1785 810433
We are continually striving to improve our products and software. If you have any comments and
suggestions on how we can do things better please send them to us at:
cptechsupport@coleparmer.com
CALIBRATION
Your Gelation Timer has been carefully factory calibrated and is provided with a calibration certificate. If
you require your unit to be re-calibrated at any time, please contact our Service Department of
Antylia Scientific Ltd.
16
Publicité
