Publicité
INSTALLATION: Trunnion Mount
STEP 1: Mark the fixing hole
locations on the wall with trunnion
bracket, then drill the holes 10mm
diameter with an electric drill.
STEP 4: Pass the fixture's AC input wires through the
trunnion bracket; then hang the fixture into the trunnion
bracket, tighten fixing screws to lock it to trunnion
bracket with a wrench.
INSTALLATION: Yoke Mount
STEP 1: Loosen the screws on both sides of the
bracket with a wrench, adjust yoke bracket's angle
to keep parallel with its installation surface.
STEP 3: Knock the one expansion bolt into each wall
hole with a hammer.
SALE on SATCO at www.BulbAmerica.com
take additional 5% Off with coupon code 5PDF
STEP 2: Knock the two
expansion bolts into wall
with a hammer.
STEP 5: Loosen the angle adjustable screws on both
sides of trunnion bracket, rotate fixture to an appropriate
angle required and tighten the two screws.
NOTE: The adjustable angel range is 0-90°.
STEP 2: Mark the installing hole locations on the wall
with yoke bracket, then drill the holes 10mm diameter
with an electric drill.
STEP 4: Attach yoke bracket to wall using expansion
screw and tighten with a wrench. Connect fixture's AC
input wires with connectors. L to L (Black), N to N (White),
PE to PE (Green). Tuck wires into junction box.
NOTE: The adjustable angel range is 0-90°.
6
STEP 3: Fix the trunnion bracket
on the mounting surface by
tightening screws with a wrench.
Publicité
