vollmer Heitronic 35378 Instructions D'installation Et De Service page 7

H. Vollmer GmbH
8. Setting the sensor

The sensor detects movement within a detection radius of approx. 8m / 100°. The sensor is operated
by a built-in photo cell. As soon as the light has been switched on by the sensor, the light illuminates for
a period of approx. 5 seconds to 8 minutes.

You can change the sensor function as follows by activating the integrated switch box.
9. Care

Disconnect the entire product from the mains first and let it cool down before cleaning or maintaining
the product.

Clean the product regularly using only a slightly moist, soft and lint-free cloth. Pay attention to any
enclosed instructions.
Installation Instructions Art. No. 35378
If you slide this switch up, the sensor will activate the light depending on the
surrounding brightness.
If you slide it down, it will only activate the light at dusk or dark. (<10 Lux)
If you slide the switch up, the sensitivity of the sensor is reduced.
If you slide it down, it will trigger at the slightest movement.
You can choose how long the light illuminates by activating this switch. (5s,
30s, 1min, 3min, 5min, 8min)
Page 3 of 4
®
Heitronic
H. Vollmer GmbH
Allmendring 29
D-75203 Königsbach-Stein
Dated 02.11.2015