Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INFORMATION
• Read and obey all instructions including your
machine owner's manual.
• Failure to obey instructions could lead to serious
bodily injury or even death.
• All rotating tools can be dangerous, use this
product at your own risk.
• Always wear ANSI approved eye and hearing
protection, as well as a dust mask or respirator.
• A full-face shield is also recommended.
• Do not use this product on any under-powered
table saw or other type of machine such as a miter
saw, portable circular saw, or any other saw that is
not recommended to run a stack dado by the saw
manufacturer.
• Consult your owner's manual before use and obey
all instructions. Contact the saw manufacturer if
you do not have the manual.
• Always turn the power off and unplug the electrical
cord when changing blades, accessories, or
servicing the machine.
• Keep your hands, body, clothing, and hair clear of
the cutting area.
• Do not wear jewelry or loose-fitting clothing while
using this product.
• Be sure to follow the rotational arrows on the
blades and chippers when installing.
• Always do a final inspection and make sure the
arbor nut is properly securing the dado.
TOLL FREE:1-800-705-4454 • FAX:905-326-5451• TEL:905-326-5450 • E-MAIL: INFO@TOOLWAY.COM
• Also ensure that the blades and chippers are properly
spaced so the carbide teeth are not touching.
• Never use this product at speeds in excess of the
maximum RPM rating.
• It is recommended to use a dado insert if using a
table saw.
• Carbide is a very hard and brittle material that can
chip or break if it strikes rocks, nails, or other foreign
objects.
• Make sure that the material you are cutting is free of
these foreign objects.
• Before each use, inspect the dado for dull, missing,
broken, or cracked teeth, or any other damage.
Do not use it if the dado is dull or any damage is
suspected.
• Use this product only for cutting wood.
• Always use both outside saw blades.
• Never use the chippers or just one outside saw blade
alone.
• Only operate the machine when proper safety guards
are in place.
• It is important that you have a stable machine free of
vibration and minimal arbor run out tolerance (0.003"
maximum run-out).
• This can be checked with a dial indicator and a
magnetic base.
ENGLISH
2
Publicité
