Publicité
Les langues disponibles
Les langues disponibles
MANY COMMON PROBLEMS CAN BE SOLVED EASILY BY UTILIZING THE CHART
BELOW. FOR MORE SERIOUS OR PERSISTENT PROBLEMS, CONTACT A PORTER-
CABLE SERVICE CENTER OR CALL 1 888 848-5175.
To reduce the risk of serious personal injury, ALWAYS disconnect
air from tool before all repairs.
Symptom
Air leak near
top of tool or in
trigger area
Tool does nothing
or operates
sluggishly
Air leak near
bottom of tool
Tool jams
frequently
Other
Height (inch/meter)
Width (inch/meter)
length (inch/meter)
Weight (lbs/kg)
recommended operating pressure 70-120 psi (4.8 to 8.3 bar)
Air Consumption per 100 cycles
loading capacity
trouBleSHootInG GuIDe
proBlemS
Loose screws.
Worn or damaged
o-rings or seals.
Inadequate air supply.
Inadequate lubrication.
Worn or damaged
o-rings or seals.
Loose screws.
Worn or damaged
o-rings or bumper.
Incorrect fasteners.
Damaged fasteners.
Magazine or nose screws loose Tighten screws.
Magazine is dirty.
Driver tip is worn or
damaged.
tool SpecIfIcatIonS
SolutIonS
Tighten screws.
Install Overhaul Kit.
Verify adequate air supply.
Put 5 or 7 drops of oil into air inlet.
Install Overhaul Kit.
Tighten screws.
Install Overhaul Kit.
Verify approved fasteners
of correct size.
Replace with undamaged
fasteners.
Clean magazine.
Install Driver Maintenance Kit.
Contact a PORTER-CABLE
Authorized Warranty
Service Center
FC350A
18.4/0.37
4.6/0.12
14.5/0.37
7.8/3.5
10.03 SCF
80 nails
15 - ENG
Publicité
