ISOUND SONIC WAVES Mode D'emploi page 4

CHARGING THE BUILT-IN LI-ION BATTERY
1, Use the include:
he back of the uni
AC or car adapter (not included).
NOTE: If you need
where you can search for item
2, The battery is ful
3, The red LED light indicates
battery is full. Pleas
located on
PLAY MOD
Slide the power swi
automatical
ES
e disconne:
ch locate
ly enter
. Plug the other end into a USB powered port or any o
о purchase an USB АС or car adapter, please visit www.isound.com
number ISOUND-2104, ISOUND-2102 or ISOUND-21
y charged in 2.5-3 hours.
hat the unit is charging. The red LED turns off when tl
ct the charging cable when charging is complete.
USB charging cable. Plug one end into the micro USB charging port
her USB
32.
on the back of the unit to the ON position. The speaker will
Bluetooth airing mode. Plug the included audio cable into the LI
port located on the back of the unit to enter AUX mode for a wired connection.
CONTROLS AND INDICATORS
1. Charge/Power Indicator
Blue LED indicates the unit is powered on
Red LED indicates the unit is charging and not full
Flashing Blue LED indicates the battery is low and needs to be recharged
2, Bluetooth Indicator
Alternating red and bl
AUXILIARY MODE
1, Plug one end of the included 3,5mm audio cable into the headphone or line-out jack of
your audio device.
2, Plug the other end of the cable into the LINE IN jack located on the back of the unit.
NE IN
ue flashing LEDs indicates Bluetooth pairing mode (search mode).
When you are successfully paired, only a blue LED will flash.