Publicité
Les langues disponibles
Les langues disponibles
Channel Control
Selecting the Antenna
Setting the Channel Manager
You can add or delete a channel so only channels you want are displayed.
1. Press the MENU button to display the menu.
Press the
or
buttons to select "Channel", then press the ENTER
2. Press the ENTER
button to select "Antenna".
Press the
or
buttons to select "Air" or "Cable",
then press the ENTER
Press the EXIT button to exit.
Press the ANTENNA button on the remote control.
If the antenna is connected to ANT 1 IN (AIR),
select "Air" and if it is connected to ANT 2 IN (CABLE),
select "Cable".
If both ANT 1 IN (AIR) and ANT 2 IN (CABLE) are
connected, select the antenna input you want. If the antenna
input is not selected properly, noise may appear on the screen.
1. Press the MENU button to display the menu.
Press the
or
buttons to select "Channel", then press the ENTER
2. Press the
or
buttons to select "Channel Manager",
then press the ENTER
3. Press the ENTER
4. Press the
or
buttons to select a channel to delete,
then press the ENTER
Press the
or
buttons to select "Delete", then press the ENTER
delete the channel.
English-32
button.
button.
button to select "All".
button.
button.
or
button.
button to
Publicité
