Audio Connections; Hdmi Connection On The Television; Hdmi Connection (Digital Receiver); Toslink (Spdif) And Coaxial (Digital Receiver) - Eminent EM7195 Mode D'emploi

4.0 Audio connections

The EM7195 has several connections for audio. During the following chapter we will
explain these connections.

4.1 HDMI connection on the television

If your television has HDMI audio support, you can make use of the HDMI cable in
order to receive both image and digital sound on your television, in stereo only.

4.2 HDMI connection (digital receiver)

If you have a digital HDMI receiver, then you can enjoy the true digital sound by
connecting the player over HDMI 1.3 to a HDMI input on your digital receiver.

4.3 Toslink (SPDIF) and coaxial (digital receiver)

If you have a digital receiver with a Toslink (SPDIF) or coaxial connection, then you
can enjoy the media player's digital sound during movie and music playback. Connect
the Toslink cable or coaxial cable to the Toslink or coaxial connection on your digital
receiver and media player.
Note: Only one cable is required. Do not connect both Toslink and Coaxial audio at
the same time.

5.0 Connecting the EM7195 to your network

Since the media player can also be used to stream your media, you can use the
media player's 100Mbps network connection. Doing so, you can retrieve media from
your networked computers or your NAS (For example: The Eminent NAS type
EM4071 or EM4072) and play these media files through the network on your
television.
1. Connect a network cable to the media player's network connection.
2. Connect the other side of the connection cable to a network connection of your
router, modem or switch.
In order to use the media player's networking capabilities you have to setup the media
player for network usage. These steps can be found in chapter 'Network setup'.

6.0 Connecting the antenna cable

The EM7195 can receive so called 'Free-to-air' DVB-T broadcasts. This means the
EM7195 can receive un-encrypted or protected television and radio broadcasts if
available. Connect the antenna cable of your indoor or outdoor antenna to the 'ANT
IN' connection of the EM7195.
29 |
ENGLISH