PAVO A2 HD Guide D'utilisation page 6

ENGLISH
MPORTANT
Please read this manual carefully before use.
Do not open the machine when connected to the power
Do not use the machine when wet
Unplug the machine when you do not use it.
Do not cover the ventilation holes .
The metal cover can become hot when the machine is in use.
Keep away from children.
MANUAL
Before starting your laminating project it is wise to do a test lamination fi rst. This is also good to get
familiar with the machine.
1. Put the laminator on a stable soil and plug the plug in a 220V socket
2. Turn on the machine with the ON/OFF switch
3. Press the switch for Hold or cold laminting on the position that you need for laminating.
4. Turn the knob indicating the thickness of your laminating pouch and wait until the machine indicates
it has reached the correct temperature for your selected thickness.
5. Put the document which you would like to laminate in the laminating pouch and entert he pouch into
the front entry. Note that you put the sealed side fi rst.
If you put it in tot he machine with the wrong side you could damage the machine .
When you see that when the pouch is not entering the machine well you can put the switch on Back-
ward. And the laminating pouch will come back out.
6. The laminated document will come out oft he machine from the back side.
Let the laminating pouch cool off before storing it elsewhere.
7. When you are ready turn off the machine and pull the plug out oft he socket.
WARNING: When you have laminated a thick pouch on a high temperature and you would like to lami-
nate a thinner pouch after pleas enote that the machine needs to cool off before you can do the thinner
pouch.
TROUBLE SHOOTING
A. If the laminating pouch is not laminated well or you will get white stripes then please, increase the
temperature. Wait until the machine is heated up and re-enter your lamainting pouch
B. If the Laminating pouch is not fl at,this means the temperature of the laminator is set too high. Reduce
the temperature in which you turn the knob counterclockwise. Please wait a few minutes and then pro-
ceed with the lamination.
C. The laminator is designed specifi cally for laminating all types of laminating pouches . However, cer-
tain brands of laminating pouches can contain too much glue , which may result during the heating pro-
cess of the glue leakage. This machine is designed that it can also work with a laminating pouch carrier.
This is not supplied with the machine. This can prevent damage or dirt on the rolls of the laminator .
D. If you want to laminate cold, Set the temperature switch to " cold" . If the laminator is hot you need to
wait until the machine cools down.
www.pavo.eu