Danby DPA060B1WDB-RF Manuel Du Propriétaire page 15

OPERATING INSTRUCTIONS
CONTROL PANEL
1. Swing button: Press to start the auto swing feature. When auto swing is activated, press again to stop
the louver at the desired angle.
2. Timer button: Press to start the automatic timer. Light will indicate whether a timer is set.
3. Mode button: Press to select the desired mode. Modes will cycle in sequence with each press of the
button; auto, cool, dry, fan. Light will indicate current mode.
4. Temperature control buttons:
• Used to set the temperature.
• Press and hold both temperature control buttons for three seconds to change the temperature display
from °C to °F.
5. LED display:
• Shows the set temperature in °C or °F.
• Shows the timer settings.
• While on dry or fan mode, shows the room temperature.
6. Fan button:
• Press to select fan speed; low, medium or high. Light will indicate current speed.
• Press and hold for 3 seconds to turn the continuous fan on or off.
7. Sleep button: Press to start the sleep feature.
8. Power button: Press to turn the appliance on or off.
1
2
3
5
6
4
14
7
3sec
8