Johnson JINDU329 Guide D'utilisation page 38

When the time is set, it will begin to count down immediately. The display will show the remaining time
Buzzer will beep for 30 seconds and the timer
indicator shows "- -" when the setting time finished.
b) Setting the timer to turn one or more cooking zones off
Touching the heating zone selection control that you want to set
the timer for.
In short time, touch timer control, the "10" will show in the
timer display and the "0" flashes.
Set the time by touching the slider control. (e.g. 5)
Touch timer control again, the "1" will flash.
Set the time by touching the slider control (e.g.9), now the timer
you set is 95 minutes.
When the time is set, it will begin to count down immediately. The
display will show the remaining time .
NOTE: The red dot next to power level indicator will illuminate
indicating that zone is selected.
When cooking timer expires, the corresponding cooking zone will
be switched off automatically.
Other cooking zone will keep operating if they are turned on previously.
Set one zone
set more zones:
13
V.1