Livoo DOM415 Manuel D'utilisation page 35

Installation
Install exhaust duct
Connect the exhaust duct to the Air outlet
connector on back of the unit. Slide-in the
adaptor A downwards until it is locked in
place.
Window slider kit preparation
Adjust the length of the Window slider kit.
When the exhaust duct and window slider
kit are ready, select one of these installation
method to connect them.
Install the window slider kit
Remove the unit with the packed exhaust
duct next to the window, and then connect
the adaptor of the exhaust duct with the
window.
Note: Cover the hole using the adaptor cap
when not in use.
EN 35