Publicité
Les langues disponibles
Les langues disponibles
BEFORE USING THE APPLIANCE:
Before charging the hair clipper for the first time we recommend fully discharging the battery and then fully charging it.
4. The hair clipper may be used connected directly to the power outlet if the battery charge is depleted. It needs to be charged when the red
charging LED, starts blinking.
The duration of the battery varies based on usage frequency and times. To increase the lifespan of the batteries, this procedure should be
carried out at least twice every 12 months, discharging the battery completely and recharging it for the maximum time. If the appliance is not
used often, remember in any case to carry out a charging cycle every so often during the year to keep it working efficiently. On the contrary,
when the charging is finished, do not keep the appliance connected to the mains to prevent the battery from overcharging and damaging the
appliance.
WARNING: Do not attempt to replace the internal battery of the hair clipper. This can lead to the risk of fire or electric shock. Tamper-
ing invalidates the warranty on the product.
CAUTION:
Lubricate the blade before the first use. Read the instructions contained in the section "HOW AND WHEN TO LUBRICATE THE BLADE"
USE INSTRUCTIONS:
• Insert the desired attachment. This operation should always be done with the hair clipper turned off.
• Turn on the hair clipper by pressing the (O/I) button.
• Turn off the hair clipper by pressing the (O/I) button
INSERTION OF COMBS:
The supplied combs have two snap on seats. One near the teeth of each comb (Fig. 1) and the other near the base of each comb (Fig. 2). To
insert the combs in the hair clipper, set the snap on base near the teeth of the comb on the hair clipper blade and then push the base of the
comb against the base of the blade head until you hear a slight click: insertion will be now be completed. Remove the combs using the tab
located on the base of the comb, exerting an outward force.
1. Make sure that the appliance is switched off.
2. Plug the appliance into the power outlet and then connect it to its adapter. The charging LED will light up and
remain red for the whole charging process. As soon as the product is fully charged, the LED will change colour.
Attention: to prolong battery life, the first charge should be much longer even if the LED changes colour.
The first charge takes 12 hours. Subsequent charges take about 90 minutes. When fully charged, the battery will
last about 120 minutes.
3. Disconnect the adapter from the outlet once it is fully charged.
15
Publicité
