Philips Lumea BRI940 Mode D'emploi page 16

English
16
C Treatment
9 Check your skin for any reactions (e.g. redness, irritation, rash).
If there are no skin reactions after 24 hours, start the treatment with the
highest comfortable setting.
If the highest comfortable setting resulted in a skin reaction, choose a lower
setting that did not result in any skin reactions.
If you did not test a lower setting, repeat the skin test.
IMPORTANT: First finish sections A (Remove hair & clean your skin) and B (Test
skin 24 hours before treatment) before starting treatment.
1 Connect the power adapter to the device and plug into a power outlet.
2 Press the on/off button
3 Choose the setting you selected after the skin test (section B, step 9).
to turn on the device.