Publicité
Les langues disponibles
Les langues disponibles
E N
OPE R ATING INS TRUCTION
1. GENER A L
WARNING! Do not operate the appliance if it is damaged or has malfunc-
tioned. If you suspect the appliance is damaged or has malfunctioned call
a qualified service engineer to inspect the appliance, and replace any part
of the electrical system if necessary, before reuse.
WA R N I N G! To reduce the risk of fire, keep tex tiles, cur tains, or any other
flammable material a minimum distance of 1 meter from the air outlet.
•
M A K E S U R E the plug fits tight in the outlet. Faulty wall outlet connections
or loose plugs can cause the outlet to overheat.
•
D O N OT disconnect the power at the mains supply whilst the appliance is
running. Use the functions on the remote to turn the fire off and ensure the
mains switch has been moved to the off position before disconnecting.
PR E PA R ATI O N B E FO R E U S E
•
The appliance can be operated by both remote control and the manual
controls on the appliance.
See chapter: Manual operation
N OT E: To use both remote and manual functions the manual on
switch must be in 'ON' position. In order to prevent the product becom-
ing too hot, there is a 10
a 10
s delay when turning off the heater fan.
BAT T E R I E S
•
Ensure that the handset batteries are new and inser ted correctly.
M A I N P OW E R S W ITC H
•
The mains power switch is located on the control panel located on the
righthand side of the heater box.
•
Switch ON (—) before operating either the remote or manual controls.
•
A long beep is heard to indicate the fire is ready for use.
s delay when turning on the heater and
/
off
31
Publicité
