Publicité
Les langues disponibles
Les langues disponibles
Step 4 Mount your hard drives onto the removable drive tray and secure it with the screws included in the
accessory kit to avoid any damage to the hard drive due to accidental movements.
Step 5 When the hard drive installation has been completed, insert the hard drive tray into the system
horizontally and secure the latch into place.
Step 6 Connect the AC power cable to the SR4-WBS3, and then plug the AC power to the wall socket.
Boot-up the unit.
Step 7 Set the storage mode using the LCD and buttons on the front (please refer to section 5 for front
panel and LCD information).
Step 8 Connect the cable to the PC and the SR4-WBS3 port.
Step 9 After boot-up, your operating system will automatically detect the storage capacity of your hard
drives. Please follow the operating system instructions to configure and format your drives. The
formatted drives can be configured for the RAID setup.
5. Description of Front Panel Operation and LCD Information
Level 0
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
EXTERNAL 4
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
BAY
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
HARDWARE
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
RAID
Level 1
Level 2
Create One RAID RAID 0 / RAID 5
Quick Setup
Quick Setup
Delete All RAID
Delete All RAID
Delete All RAID
Identify Disk
Identify Disk
Identify Disk
Identify Disk
Disk Manager
Disk Manager
Disk Manager
Disk Manager
Disk Manager
Show Disk Info
Identify RAID
Create RAID
Delete RAID
RAID Manager RAID Info
RAID Manager
RAID Manager
RAID Manager
RAID Manager
RAID Manager
RAID Manager
Change RAID Pwd < Password >
Rebuilding Priority Highest/High/Medium/Low/Lowest
Standby Timer
System Info
Change Password < Password >
Logout From Menu < Y or N >
Alarm Control
System
System
System
System
System
System
System
Manager
Manager
Manager
Manager
Manager
Manager
Manager
Hardware Monitor
Hardware Monitor
Hardware Monitor
SOHORAID SR4 User Manual
Level 3
Disk 1
Disk 2
Disk 3
Disk 4
< Disk Info >
< Disk Info >
Select RAID
Select RAID
RAID 0 / RAID 5
Select RAID
Select RAID
< Password >
Highest/High/Medium/Low/Lowest
< 99999min >
< 99999min >
Firmware Version
Firmware Version
< Password >
< Y or N >
Mute the Buzzer
Mute the Buzzer
Voltage Monitor
Temp. Monitor
FAN Monitor
6
Level 4
Select Disk
Check Disk LED
Check Disk LED
Check Disk LED
Check Disk LED
Select Disk
for RAID setup
for RAID setup
for System Info
for System Info
< 3.3V / 5V / 12V >
< Temp. >
<Fan Speed/Fan
Level>
Publicité
