Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
TROUBLESHOOTING GUIDE
PROBLEM
CAUSE
Engine will
1.
not start
2.
3.
4.
5.
6.
7.
No electrical
1.
output
2.
3.
4.
5.
Repeated
1.
circuit
2.
breaker
tripping
Generator
1.
overheating
2.
A16596
Low on fuel or oil.
Ignition switch in "Off"
position.
Faulty spark plug.
Choke in wrong position.
Fuel shut-off valve in
closed position
Unit loaded during start-up. 6.
Spark plug wire loose.
Faulty receptacle.
Circuit breaker kicked out.
Defective capacitor.
Faulty power cord.
GFCI switch breaker kicked
out (if equipped)
Overload
Faulty cords or equipment
Generator overloaded.
Insufficient ventilation.
20- ENG
CORRECTION
1.
Add fuel or oil.
2.
Turn to "ON" position
3.
Replace spark plug.
4.
Adjust choke accordingly.
5.
Open fuel shut-off valve.
Remove load from unit.
7. Attach wire to spark plug.
1.
Have Service Center
replace.
2.
Depress and reset.
3.
Have Service Center
replace capacitor.
4.
Repair or replace cord.
5. Depress and reset
1.
Reduce load.
2.
Check for damaged,
bare, or frayed wires on
equipment. Replace.
1.
Reduce load.
2.
Move to adequate supply
of fresh air.
Publicité
