Venen Engel 8 PREMIUM Mode D'emploi page 31

INFORMATION ON REUSABILITY
REPROCESSING PROCEDURE
1.
Disassembly:
○
Disconnect the sleeve, hoses and control unit.
2.
Testing:
○
The cuff, hoses and control unit are tested for faults and functional capability.
3.
Cleaning the cuff:
○
Cuff is cleaned with warm water (>50°C) and with disinfection additive. Afterwards, the cuff is rinsed with clear water and dried
completely.
4.
Repair:
○
If the control unit has any defects, they will be repaired or the control unit will be replaced.
5.
Packing:
○
Cleaned and tested individual parts are properly packed.
31