Samsung NE63675S Serie Mode D'emploi page 58

Maintaining your appliance
Fig. 2 Fig. 2
How to re-install the door
Hinge arm Hinge arm
Bottom Bottom
edge of edge of
slot slot
Indentation Indentation
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentation
of the hinge arm into the bottom edge of the hinge slot. The notch in the
hinge arm must be fully inserted into the bottom of the slot.
58 English
5. Lift door up and out until the hinge arm
is clear of the slot (Fig. 2).
Unlocked position Unlocked position
3. Open the door fully. If the door will not open fully, the indentation is not
inserted correctly in the bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the
locked position.
5. Close the oven door.
Hinge lock Hinge lock
Locked position Locked position