Publicité
Les langues disponibles
Les langues disponibles
is left open.
4. Lift the kettle from the power base and then pour the water.
NOTE: Operate carefully when pouring the water from your kettle as
boiling water may result in scald, besides, don't open the lid while the
water in the kettle is hot.
5. The kettle will not re-boil until the switch is uplifted. Allow to cool for
15~20 seconds before reopening to boil water. The kettle may be
stored on the power base when not in use.
NOTE Ensure power supply is turned off when kettle is not in use.
Boil-dry protection
Should you accidentally allow the kettle to operate without water,
the boil-dry protection will automatically switch it off. If this should
occur, allow the kettle to cool before filling with cold water and
re-boiling.
CARE AND CLEANING
Always disconnect the appliance from the power outlet and leave it
to cool down completely before cleaning.
Never immerse the kettle or cord in water, or allow moisture to
contact with these parts.
1. Fill the kettle with 3 cups of white vinegar and the remainder of
water and be allowed to stand overnight. Do not boil.
2. Empty the solution from the kettle. Any stains remaining inside the
spout can be removed by rubbing with a damp cloth, fill the kettle
with clean water, bring to boil and then discard the water. Repeat
and the kettle will then be ready to use.
Cleaning external housing
Wipe the external housing with a wild and damp cloth or cleaner.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to
clean the outside of the kettle.
Cleaning the filter
Remember to clean the filter with a wild and damp cloth at intervals.
Storage
When not in use or storage, the power cord may be wound around
the cord storage under the base of kettle.
- 3 3 -
Publicité
