Waeco ASC1000G Notice D'utilisation page 73

AirConServiceCenter
7 Initial start-up
7.1 Setting up and switching on
1. Wheel the AirConServiceCenter to the workplace and lock the front
wheels (9).
I
NOTE
During operation, the device must be on a horizontal, flat surface so that
measurements can be made correctly.
2. Connect the AirConServiceCenter to the mains.
3. To switch it on, set the main switch (20) to I.
The software version number appears in the display (6) for several
seconds:
"SW": Software status
"DB": Database
"SN": Series number
✓ The AirConServiceCenter then runs a software test.
✓ When the start-up procedure is complete, the AirConServiceCenter
displays the following:
– ASC1000G:
– ASC2000G/ASC3000G:
EN
Dometic WAECO
ASC2000G SW
DB
SN
Software test.
Please wait
Refrigerant
11:56:35
Refrigerant
PAG oil
UV tracer
11:56:35
AS2k0046
lhd10028
000020
g. 4820
10/03/15
g. 4820
ml 375
ml 313
10/03/15
Initial start-up
73